parris ultimate cue

[joe2311]

i have a parris ultimate cue in maple 1 piece but had joint put in just above splice cue is 58in long 19.5oz in weight with a 10.5mm tip with a limited edition 1 splice cue is in mint condition . looking to swap/px for quality cue pref 1 piece ash with dark grain nice arrows chevrons ect. with around same weight tip size but must be 58in long photos on request.

[jimmymoller]

woud you sell it

[joe2311]

for the right price yes but would prefere swap/px does anyone know of any shops which take cue in px.

[Wity]

crafttsmen cues leeds... definately.
every other shop.... most likely.

Why prefer a part exchange/swop v sell/buy ?

[ADR147]

for the right price yes but would prefere swap/px does anyone know of any shops which take cue in px.

me - what are you after?

[cueman]

I'd sell it if it were me. You will easily get £350+ on Ebay alone for a Parris Ultimate. With that you can specify anything you like, well within reason, from Trevor White.

PX anything and you usually end up losing out when it comes to ££££'s. Someone will see a chance to make a quick buck, no offence ADR .
I presume you paid well over £400 for the cue, why exchange it for something that is worth only £200 tops!

[ADR147]

I'd sell it if it were me. You will easily get £350+ on Ebay alone for a Parris Ultimate. With that you can specify anything you like, well within reason, from Trevor White.

PX anything and you usually end up losing out when it comes to ££££'s. Someone will see a chance to make a quick buck, no offence ADR .
I presume you paid well over £400 for the cue, why exchange it for something that is worth only £200 tops!

remember of course i make the money on the cues i sell from the makers not the customers !! - last ultimate i put on ebay went for £305 if that helps - what he exchanges it for and its value depends on what he chooses, why £200 tops?

[joe2311]

not so sure what cue i am looking for i dont change cues often this is only my second cue in 20 years i still have my 1st one an 1 piece maple riley club cue machine spliced but its falling to pieces but what a cue if i could get a replica of the cue ie the taiper for me thats what makes a good cue the taiper. and on my old cue its perfect for me so if any cue maker can do this i would be very greatfull.

[joe2311]

just a quick 1 can a cue be respliced ie just keeping the shaft from an old cue taking the old splices out and putting new ones in and making a new cue out of it.

[ADR147]

just a quick 1 can a cue be respliced ie just keeping the shaft from an old cue taking the old splices out and putting new ones in and making a new cue out of it.

yes of course any of the top cue makers could reuse that shaft for you and make it into a new cue. and if its just the splices that are the problem that is what you should do.