j6 cue stories

[j6uk]

just popped over to put the last splices on the next

[j6uk]

still chiseling away at this old cue and this is what i managed to scrape out

[Shockerz]

Looks good J. Is that a scaper you finish it off with?

[j6uk]

yeah fine planing then scraping, i try to do as little sanding as possible

[Shockerz]

'J'

I'm starting to get the shakes, need a fix!!!

What you up to? Not too many cue makers in here any more....

[j6uk]

just put a few hrs in.
took these down to 57.5, fine tapering and sanding at the last 8 inch, then first few coats of oil







----------------------------------------------------



this is now ready to go at 57.25/9.2/29.2/17bp/17.5oz










-

[Shockerz]

Some nice work there 'J'

All the cues look top notch, glad you've introduced ebony as well.

[j6uk]

Some nice work there 'J'

All the cues look top notch, glad you've introduced ebony as well.

cheers shock, not there yet but moving in the right direction.. shaft work is pretty much there now, and should be some hitters coming through over the next week or so

[mikeyd100]

Good stuff J6 - just keeps getting better.

[rdp50734]

Do you have a bit of a catalogue with what you have for sale and prices?

[j6uk]

no not really, best if you pm me what kind of cue your looking for

[j6uk]

fine sanded, oiled, burnished, and on its way













-

[Shockerz]

Nice work J.

Packaging looks good with the pipe lagging in there.

Do you use a different size either end? e.g. 28mm the butt end and 10/15mm the tip end?

Nice cue finish on the ebony.

[mikeyd100]

Nice work J.

Packaging looks good with the pipe lagging in there.

Do you use a different size either end? e.g. 28mm the butt end and 10/15mm the tip end?

Nice cue finish on the ebony.

I like the handling of the cue with the white gloves. Just shows that extra touch of care.

[j6uk]

Nice work J.

Packaging looks good with the pipe lagging in there.

Do you use a different size either end? e.g. 28mm the butt end and 10/15mm the tip end?

Nice cue finish on the ebony.

cheers yeah it turned out well all finished. as for the lagging i keep it the same but cut the tubes to 10mm over the size of the cue then pad it for a snug fit

I like the handling of the cue with the white gloves. Just shows that extra touch of care.

a habit i got into towards the end of the finish and before packing