Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: Cue Craft Sabre cue??

  1. #1
    Join Date
    May 2013
    Location
    uk
    This is rightoncue89's Country Flag

    Posts
    190
    vCash
    1000

    Default Cue Craft Sabre cue??

    IMG_20181006_185829.jpg
    -- This message may have been cut off and the rest will only be shown to members. To become a member, Click HERE --




  2. #2
    Join Date
    Feb 2010
    Location
    Berkshire
    This is DeanH's Country Flag

    Posts
    14,959
    vCash
    1000

    Default

    Yep seen that joint before and my guess is 80s.
    Will have a look when I get home to check. -- You need to be registered to read the rest of this thread, To become a member, Click HERE --
    Up the TSF!

  3. #3
    Join Date
    Jun 2007
    This is CueAntW147's Country Flag

    Posts
    1,367
    vCash
    1000

    Default

    Sure it's the 90's dot to dot joint, a good idea in theory, but in my experience the joint doesn't age well lots of wood has to be bored out to fit th

    -- You need to be registered to read the rest of this thread, To become a member, Click HERE --

  4. #4
    Join Date
    Feb 2010
    Location
    Berkshire
    This is DeanH's Country Flag

    Posts
    14,959
    vCash
    1000

    Default Cue Craft Sabre cue??

    I recognise it as a friend had one but can't pin down when got it to late 80s or early 90s (getting old ya know!) -- You need to be registered to read the rest of this thread, To become a member, Click HERE --
    Up the TSF!

  5. #5
    Join Date
    Jun 2007
    This is CueAntW147's Country Flag

    Posts
    1,367
    vCash
    1000

    Default

    -- You need to be registered to read the rest of this thread, To become a member, Click HERE --

  6. #6
    Join Date
    Aug 2017
    Location
    Barnstaple
    This is vmax's Country Flag

    Posts
    452
    vCash
    1000

    Default

    -- You need to be registered to read the rest of this thread, To become a member, Click HERE --
    Speak up, you've got to speak up against the madness, you've got speak your mind if you dare
    but don't try to get yourself elected, for if you do you'll have to cut your hair

  7. #7
    Join Date
    Feb 2010
    Location
    Berkshire
    This is DeanH's Country Flag

    Posts
    14,959
    vCash
    1000

    Default

    my friend's was a 1/2, as 3/4 where not that common, if not non-existent, back then -- You need to be registered to read the rest of this thread, To become a member, Click HERE --
    Up the TSF!

  8. #8
    Join Date
    Jan 2012
    Location
    Larkhall,Lanarkshire.
    This is bigandyg's Country Flag

    Posts
    898
    vCash
    1000

    Default

    Used these Cuecraft joints for years and never had trouble with them.

    -- You need to be registered to read the rest of this thread, To become a member, Click HERE --

  9. #9
    Join Date
    Oct 2011
    Location
    Newcastle
    This is Dave Walton's Country Flag

    Posts
    1,345
    vCash
    1000

    Default

    Had a few cues with those joints and a couple have went wrong, good reason why no one uses them anymore.

    -- You need to be registered to read the rest of this thread, To become a member, Click HERE --

  10. #10
    Join Date
    Dec 2016

    Posts
    614
    vCash
    1000

    Default

    They were used in the 80's-90's and a few makers used them cue craft was one that used them.
    If looked after, they are fine but some went wrong

    -- You need to be registered to read the rest of this thread, To become a member, Click HERE --
    For that one you've always wanted...
    https://www.facebook.com/ninjacues/

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •