Results 1 to 10 of 10

Thread: Snooker table un level

  1. #1
    Join Date
    Dec 2017
    Location
    Nottinghamshire
    This is Carl877's Country Flag

    Posts
    39
    vCash
    1000

    Default Snooker table un level

    Hi had my snooker table since june 2018.
    It has had to be releveld twice since then and now ive noticed its not level again the table is on a concret reinforced floor. With osb boards layed on top. Anyone got any advice on what i can do to not have to relevel it so much. I have a feeling its

    -- This message may have been cut off and the rest will only be shown to members. To become a member, Click HERE --




  2. #2
    Join Date
    May 2009
    Location
    Darlington, UK
    This is jrc750's Country Flag

    Posts
    14,548
    vCash
    700

    Default

    Well I'm no expert but how can osb boards support the weight of a snooker table?

    -- You need to be registered to read the rest of this thread, To become a member, Click HERE --

  3. #3
    Join Date
    Aug 2018
    Location
    HappyDale
    This is Nifty50's Country Flag

    Posts
    94
    vCash
    1000

    Default

    Would the boards not eventually get to the stage where they can't be compressed any more by the weight of the table? I'm no expert either but it would

    -- You need to be registered to read the rest of this thread, To become a member, Click HERE --

  4. #4
    Join Date
    Dec 2017
    Location
    Nottinghamshire
    This is Carl877's Country Flag

    Posts
    39
    vCash
    1000

    Default

    Im hoping the same reason why i went for the osb boards was to help with keeping the room warmer

    -- You need to be registered to read the rest of this thread, To become a member, Click HERE --

  5. #5
    Join Date
    May 2009
    Location
    Darlington, UK
    This is jrc750's Country Flag

    Posts
    14,548
    vCash
    700

    Default

    Maybe need to cut holes in the boards and sit table direct to concrete floor ? that sounds easy ehh -- You need to be registered to read the rest of this thread, To become a member, Click HERE --

  6. #6
    Join Date
    Dec 2017
    Location
    Nottinghamshire
    This is Carl877's Country Flag

    Posts
    39
    vCash
    1000

    Default

    Probably what ill end up having to do or take it all up

    -- You need to be registered to read the rest of this thread, To become a member, Click HERE --

  7. #7
    Join Date
    Jul 2009
    Location
    Pleven
    This is philip in china's Country Flag

    Posts
    1,750
    vCash
    1000

    Default

    In a previous life I used to be involved in siting some seriously heavy objects. We used, sometimes, to use a spreader plate. That is a piece of steel

    -- You need to be registered to read the rest of this thread, To become a member, Click HERE --
    王可

  8. #8
    Join Date
    Feb 2009
    This is Mike P's Country Flag

    Posts
    333
    vCash
    1000

    Default

    Are you are regulating the humidity in the room. If not I would try that first, it might save you a lot of work.

    -- You need to be registered to read the rest of this thread, To become a member, Click HERE --

  9. #9
    Join Date
    Dec 2017
    Location
    Nottinghamshire
    This is Carl877's Country Flag

    Posts
    39
    vCash
    1000

    Default

    Hi humidity is never higher than 60 and never lower than 45. temperature never goes below 16.

    -- You need to be registered to read the rest of this thread, To become a member, Click HERE --

  10. #10
    Join Date
    Jul 2009
    Location
    Pleven
    This is philip in china's Country Flag

    Posts
    1,750
    vCash
    1000

    Default

    Also if you did cut holes for the feet, that would reduce the playing height. There are maximum and minimum heights for the bed.

    -- You need to be registered to read the rest of this thread, To become a member, Click HERE --
    王可

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •