Announcement

Collapse
No announcement yet.

Strachan superfine

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Strachan superfine

    Hello. Im newbie, just purchased snooker table & ordered strachan superfine bed and tournament for cushions. Can anyone, please, give some advice, how often to iron it, which temperature? (Special iron set tools hard to find in my country, so, i can use only regular iron, can measure temperature). Does it need heating and how long it will last, is it durable or not? I will be grateful for any advice

  • #2
    I think Danger Steve has the super fine cloth on his table, hopefully he can give you some advice.
    This is how you play darts ,MVG two nines in the same match!
    https://youtu.be/yqTGtwOpHu8

    Comment


    • #3
      I have the Hainsworth equivalent in the match cloth ,and because there is something like a 5% nylon content you have to be a bit more careful ironing it .Superfine is 100% pure wool ,temperature remains the same for ironing same as it would be for no 10 or 6811 .it’s not recommended to use a normal iron but if you must ,test it on newspaper first ,these household irons won’t hold the heat long enough to do the table in one go so it will be to probably be needed to be plugged in again to get the heat back up to do the table again starting from the other side .Snooker cloths wear depending on how much use they get ,on average with say a match or superfine in a private room should get over a year of good use maybe 18 months if your lucky .Heavier cloths last longer but you can’t have both speed and durability .brush block and iron the table regularly,change the spots every month and it should last and play well for a decent time .Get a proper iron as soon as possible .

      Comment


      • #4
        Thank you very much for your responces. I will try to find proper iron asap.today my table will be streched with that cloth. Do i need to iron it before first use?

        Comment


        • #5
          Hi!

          The table fitter will usually bring their own iron and give it maybe a couple passes before you start to use it. Get a proper iron for snooker tables when you can, I’ve never used a cloths iron so can’t really comment on the best way to use one.

          The superfine itself is surprisingly durable for such a thin cloth! I’ve had mine on now for around 8 months and it’s only now showing some wear around the black spot and a hint of track line into the black corner pockets. I use my table probably 2 hours a day on average so it doesn’t get the same level of abuse as a club table.

          If your table is in a well insulated, dry building or home then heaters are not necessary, but they can make playing on the table a nice experience and I think they do help the table to play consistent and slightly faster. If your table is in an environment where the temperature can fluctuate and humidity is high then I think table heaters really work well at keeping the table playing very nicely! Worth bearing in mind if you have a room with aircon and a heated table they do kind of fight against each other, so there is a bit of trial and error to find the perfect settings for your room.

          Depending on what chalk you use will dictate how often you brush the table, if using something messy like triangle you will probably be brushing the table a couple of time a day (depending on use). If using Taom then really you can get away with minimal brushing! Just give the table a pass with a blocking tool instead to remove any residue, dust or fingerprints. I usually brush mine either the day I’m about to play or every other day if it’s not had much use! *Tip: Remember to gently brush and block your cushions too! But make sure you go with the nap! Doing this will remove any chalk that gets onto the cushion which causes those weird bounces!

          Where in the world are you?

          Comment


          • #6
            Thank you so much for your advices! I live in russia and snooker is not popular at all here. In my city 1.3m population there is only 1 snooker table in 1 club. So, hard to find proper equipment for it. The fitter, said that during 15 years of his work it is just 3rd snooker table he assemble. Luckily, I found this forum where there is really a lot of useful information. Thanks a lot for the tips and advice!

            Comment


            • #7
              I've a problem with fitters. At first, they fit badly cloth near side pockets (there were bubble). Now, they try to fix it like that.

              Comment


              • #8
                https://ibb.co/4W2qjbS
                https://ibb.co/sqzjMrx
                https://ibb.co/BVS1417

                Comment


                • #9
                  Feel terrible, because new cloth strached like that. The fitters say that this is the norm

                  Comment


                  • #10
                    That is not the norm for fitting ,that cloth is ruined ,never seen a cloth cut all over round the middles ,I’m guessing he’s done that because he lacks the skill to fit a cloth ,also it’s stapled rather than tacked .fitting and shaping around the middles requires nothing more than one slight cut in the middle low down on the cloth ,your cloth looks my dog had chewed it .

                    Comment


                    • #11
                      I told them i dont want to see any cuts or bubbles in the pocket, and if they cant strech it properly now, they should buy new cloth for me, and i'll find someone who can. Now they try to fix it, they took off all cloth and try to strech it , so cuts would be lower than staples. I hope they will not ruin it.. really im very upset about it

                      Comment


                      • #12
                        Obviously they have no experience fitting snooker tables. To me that cloth doesn't look anywhere near tight enough. Even with the middle released there appears no pressure on the cloth. Snooker cloth are pulled pretty damned tight, so tight that these fine cloths can tear if care is not taken. That cloth doesn't look like it has any tension in it. They could look on YouTube at people fitting cloths and at least get an idea on how it's done. I would rather do it myself than let them anywhere near my table.
                        This is how you play darts ,MVG two nines in the same match!
                        https://youtu.be/yqTGtwOpHu8

                        Comment


                        • #13
                          Originally Posted by itsnoteasy View Post
                          Obviously they have no experience fitting snooker tables. To me that cloth doesn't look anywhere near tight enough. Even with the middle released there appears no pressure on the cloth. Snooker cloth are pulled pretty damned tight, so tight that these fine cloths can tear if care is not taken. That cloth doesn't look like it has any tension in it. They could look on YouTube at people fitting cloths and at least get an idea on how it's done. I would rather do it myself than let them anywhere near my table.
                          You are absolutly right. The thing is, snooker tables are very rare here. They just finished work, restreched all cloth, now pockets still has some cut, but it is lower now. And looks like this:
                          https://ibb.co/NtrZZgV
                          https://ibb.co/zH4QgCz
                          they maskered it with part of old cloth from behind.
                          before pockets were much more terrible:
                          https://ibb.co/BZzjB1X
                          https://ibb.co/RhB7tfF

                          next time i'll change the cloth, i will try to do it by myself. . because i forced fitter

                          Comment


                          • #14
                            Sent post before i finished typing it and cant edit i want to say, probably better learn how to fit by myself than stay near fitters and force them to do it right

                            Comment


                            • #15
                              Originally Posted by firmshare View Post
                              Sent post before i finished typing it and cant edit i want to say, probably better learn how to fit by myself than stay near fitters and force them to do it right
                              you will et edit function after 10 posts and a bit of patience (logout/login)
                              Up the TSF! :snooker:

                              Comment

                              Working...
                              X