Originally Posted by kbrown
View Post
-
I played with a 3/4 Peradon for a while. They are great cues. Wish you the best for this cue when it arrives. Could you please take some photos so we can see what it looks like and post them up (or send the pics to me and I will do that for you)? Would be beneficial for members to see what the cue looks like and it's price. -
I have seen three Peradons and had a hit with two, one a King, can't remember the second, but it felt very very nice but a bit heavy for me, the third was and still is used by the six time Cumbrian county champion, Mike Nixon, it's the model with the diamond shaped badge, didn't get a hit with that one, but he's apparently had loads and loads of 147 s so if it's good enough for him it can't be bad lol.
Best of luck, it's unusual for someone to go down the centre joint road nowadays.Leave a comment:
-
I went with Peradon as their turn around time is pretty quick. They have this service available: http://www.cuewizard.co.uk/Originally Posted by itsnoteasy View Post
It's going to be a 58" 18oz ash shaft cue with hand spliced ebony butt with kingwood & plum veneer decorations and a starndard 9.5mm tip. Should have it within 3-5 weeks.Leave a comment:
-
Once it gets into your brain that your cue isn't quite right, you will never play at your best. Under pressure, that tiny little doubt will make you miss. I know the feeling as I'm there nowOriginally Posted by kbrown View Post
Leave a comment:
-
Okay. Fair enough. I hope you like your new cueOriginally Posted by kbrown View Post
Leave a comment:
-
My very first cue was a 1/2 jointed BCC Ray Reardon cue. It wasn't a top of the line cue but the joint in the center never really bothered me. I now have a 3/4 Peradon Century which I bought cheap from a colleague. For some reason I've never liked it too much so I was going to get a new one at some point anyway. Buying the wrong case gave me the perfect excuse to actually get a new cue so I thought I'd get a custom one with my own specs and the joint in the center. Bit silly I know but at least I should get a very good quality cue.Leave a comment:
-
I'm assuming the OP hasn't already become accustomed with his new cue?Originally Posted by cyberheater View PostLeave a comment:
-
You bought the wrong length case for your cue and you considered selling your cue. That's a new on on me.Leave a comment:
-
Going by the top pros, I don't believe any in recent memory have played with a 1/2 jointed cue except Mark Williams a few years back. They all typically use 3/4 and one piece cues. Reason being you can (in theory and practice) get more feel and touch without a joint. One piece cues, however, tend to have issue with being slightly too light so 3/4 joints are often used. All cues resonate with a unique vibration when striking the white ball and so any joints can typically reduce this feel back into your cueing hand. When selecting cues, it's the shaft and overall balance that a real enthusiast worries about. Inlays, butt woods, and design are generally secondary to these two concerns.Leave a comment:
-
Well I decided to order a custom made cue which will fit inside the case so the sale is off for now. Can't wait to try the new cue
Leave a comment:
-
3/4 vs 1/2 jointed cues?
Hi,
Are there any advantages/disadvantages of having a 3/4 jointed cue instead of the joint in the middle?
The reason I ask is because I was dumb enough to buy a case for a middle jointed cue while my cue is actually a 3/4 jointed one
So I've got two options: Either sell the case or get a new cue that fits inside it
Btw, do let me know if you're in the UK and are in the market of buying a cue case. The case in question is this: http://www.peradon.co.uk/cue-cases/t...).aspx#product
Cheers,
Kari
Leave a comment: